Glove Box Laser Welding Packaging Technique
When specific components these types of as semiconductor units, integrated circuits, and optoelectronic devices are subjected to laser welding and packaging operations, the welding products are uncovered to the air and are specially inclined to oxidation below significant temperature conditions, resulting in welding defects this sort of as porosity, slag inclusions, cracks, and very low welding strength. , Primary to soaring failure costs this sort of as very poor airtightness, low toughness, and impression resistance of the device, in particular the effects resistance defect will induce problems to the system flying superior Mach, creating major safety incidents and property losses. At current, the domestic industry urgently wants a The laser welding packaging gadget that can be applied under vacuum situations or underneath specific ambiance safety situations has a fantastic guy-machine surroundings and versatile gear to meet up with the requirements of large-close gadgets, specially specific equipment for significant-velocity aerospace motor vehicles.
Etelux presents a laser welding glove box based mostly on atmospheric safety. To resolve the effects of air humidity and air impurities in laser welding, the glove box has two 90-degree square cabins, the left side is the heating cabin, and the appropriate facet For the transitional cabin, the highest temperature of the heating cabin is 200 ℃, the heating plate can be cooled quickly at the exact same time, the exterior of the square cabin door is a guide door, the interior doorway is an computerized door, the inner and outer doorways are interlocked, the glove box is managed to be cleaned by a move meter, and can also be connected to the purification program. Its traits are: reduced leakage, low water and oxygen content in the box, steady total equipment efficiency, and legitimate and trustworthy drinking water and oxygen detection.